Fike Twinflex I/O Module (802-0006) — a two-wire Twinflex interfacing module providing a monitored input (with selectable EOL supervision) and two changeover relay outputs for interfacing ancillary equipment such as plant shutdown, door releases, ventilation control or auxiliary alarms with a Twinflex zone. Supplied mounted in a standard double-gang back box for flush or surface installation.

• Key features:
  • Monitored input with EOL supervision options (3.3 kΩ and 680 Ω firing resistors).
  • Two changeover (DPCO) relay outputs suitable for switching mains or low-voltage loads (do not mix mains and low-voltage on the same unit outputs simultaneously).
  • Onboard DIP switches for input/output mode, alarm mode and EOL behaviour configuration.
  • LED indicators for Output Active and EOL/Input status.
  • Supplied mounted in a standard double-gang back box for quick installation.
• Use cases: Interface modules for addressable Twinflex fire panels — suitable for installers and contractors needing monitored inputs or programmable relay outputs for plant control, door release, ventilation or auxiliary alarm signalling.
• Compliance & documentation: Declared performance to EN54-18; Declaration of Performance available. Refer to the Fike installation & maintenance manual for full wiring, DIP-switch settings and the DoP.
• Safety & installation notes: Mains wiring to outputs must be installed by a suitably qualified person. Follow the panel and module installation manual for safe wiring and correct fuse selection; verify panel compatibility (Twinflex Pro / Twinflex V3 supported; not compatible with Twinflex SRP).