Keim Ecosil ME is a high performance, environmentally friendly mineral paint for interior use. KEIM Ecosil ME optimises air quality, making use of the MiNox™ effect, using photocatalytic pigments to reduce noxious gases and odours by transforming them into natural substances.

Particularly suitable for interior walls and ceilings in heavily used areas such as public buildings, hospitals, schools, offices, hotels, restaurants and food storage areas. Suitable substrates include all mineral plasters, concrete, plasterboard and sound previously painted surfaces. Keim Ecosil ME is not suitable for use on pure gypsum or on surfaces with salt efflorescence, on wood and enamels.

Key Features

• Cleanable in accordance with DIN 53788, scrub-resistant.
• Free from solvents, plasticisers and biocides.
• Highly obliterative.
• Non flammable (Class A2-s1,d0 as per EN 13501-1 acc. to classification report).
• Resistant to mould and fungal growth.
• Photocatalytic effect.
• Anti bacterial action.
• Resistant to disinfectants.
• Suitable for allergy sufferers.
• Safe for application in food preparation areas.
• Specific Weight 1.60g/cm3.
• Resistance to vapour diffusion sd= 0.02 m.
• Degree of glossiness matt.
• Cradle to Cradle Certified Silver

Preparation & Application

Substrate Preparation
All loose, flaking and unstable material must beidentified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, winddry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed.

Highly absorbent or friable substrates should betreated with Keim Granital Dilution. Keim Ecosil Grund should be applied as a firstcoat in order to equalise differing levels ofabsorbency and on previously painted surfaces.

Application
Keim Ecosil ME should be applied as a 2-coat undiluted system with a minimum period of 5 hours between coats. Keim Ecosil ME can be applied by brush, roller or airless spray. For previously painted surfaces and dry-lined surfaces Keim Ecosil Grund should be used as the first coat.

Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces.

Consumption
Approx. 0.3 lt/m² for two coats.

Consumption rates are offered for guideline purposes only and are quoted for smooth surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.

Cleaning of Tools
Clean tools with water immediately after use.

Data Sheet

Keim Ecosil-Me TDS