Keim Granital Mineral paint is an effective exterior paint for all absorbent and mineral surfaces. Boasting water repellency, vapour permeability and forms of chemical crystalline bond with the substrate. 

Blistering and Flaking are eliminated with the crystalline nature of this paint, allowing vapours to pass freely through the coating from the substrate whilst also protecting against the ingress of moisture. 

Key Features

• Highly water repellent
• Water vapour permeable
• Resistance to UV
• Resistance to mould, fungal and algal growth
• Resistance to airborne pollutants and acid rain
• Free from solvents, biocides and preservatives
• Environmentally Friendly, ISO14001
• Nature Plus Certification
• Low VOC
• Non-fading colours (Keim colour palette: Exclusiv) 
• Incombustible
• For external use
• Cradle to Cradle Certified Silver

Preparation & Application 

Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using KEIM Mineral Paints may proceed.

Application
If the substrate is porous we would advise to first coat all surfaces with KEIM Granital Dilution, brush applied and worked well into all surfaces, this will help reduce any high surface porosity and should be left for a minimum period of 12 hours before further decoration. Onto unpainted surfaces KEIM Granital should be applied as a two coat system, the first coat to be diluted with up to 30% by weight KEIM Granital Dilution and applied by brush or roller, working well into all surfaces. After a minimum period of 12 hours a final coat of KEIM Granital may be applied undiluted. For previously painted surfaces KEIM Granital Grob diluted with up to 20% by weight KEIM Granital Dilution should be used as a first coat. It is important to point out that when any redecoration is taking place this must be taken back to a natural breakline.

Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.

DATA SHEET

Keim Granital TDS