KEIM Soldalit-Grob is a filled silicate priming paint with a slight slurrying effect for priming and intermediate coats using the KEIM Soldalit system.

Formulated on the basis of a proven binder combination of silica sol and water glass allows KEIM Soldalit-Grob silicate coats not only on mineral but also on a wide range of organic substrates – directly and without additional bonding bridges.

Filled and pigmented with weather-resistant fillers and purely inorganic pigments, it combines KEIM Soldalit-Grob all the benefits of classic dispersion silicate paint with the substrate versatility of organically bound paint systems.

KEIM Soldalit-Grob also satisfies the requirements of DIN 18363 para. 2.4.1 "Dispersion silicate paint". KEIM ® Soldalit-Grob is awarded with Cradle to Cradle Certified Silver and C2C Certified Material Health Certificate™ Gold.

Key Features

• Equalises differences in texture
• Multipurpose application
• Alkaline
• Non-flammable
• Water vapour permeable, microporous
• No solvents and plasticisers added
• Cradle to Cradle Certified Silver

Preparation & Application

Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application using KEIM Soldalit Grob may proceed. KEIM Contact Plus can be used instead of KEIM Soldalit Grob as a base coat for large cracks over 1mm in width or where there is a need to equalise the surface.

Application
In most instances KEIM Soldalit Grob should be applied undiluted and can be applied by brush, roller, or, spray. After a minimum waiting period of at least 12 hours KEIM Soldalit in the chosen colour may be applied.

Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.

Clean tools with water immediately after use.

Data Sheet

Keim Soldalit Grob TDS