Do I need to paint all four pieces separately, or can I spray them assembled?

Spray each piece individually before installation. This allows you to sand, prep, and apply primer and color coat evenly across all surfaces without masking concerns. Once cured and final-fitted, you can touch up seams or gaps as needed after mounting.

Will the side skirts interfere with my factory jack points?

Verify jack point placement on your vehicle before final installation. The side skirts are designed to integrate with factory mounting, but some vehicles have offset lift points. Check your service manual or test-fit the driver-side skirt first to confirm clearance with your lifting equipment.

Do I need gap filler or seam tape between the body panels and my factory body lines?

Minor gaps between FRP pieces and the original body are normal and do not require filler — these are cosmetic seams that typically disappear once painted. If you encounter larger gaps (more than 1/8"), check panel alignment and verify mounting hardware is seated fully before applying any adhesive or sealant.