Do I need to seal the edges after installation?

Yes. Carbon fiber edges are exposed after cutting and benefit from edge sealing to prevent moisture ingress and maintain long-term durability. Sand the edges lightly, then apply a UV-resistant epoxy or resin to lock them. This protects the weave and prevents delamination at stress points.

Will the carbon weave yellow under UV exposure without clear coat?

Carbon fiber is naturally UV-stable, but the resin matrix can yellow over time if unprotected. A clear coat layer will preserve the weave's appearance and guard against oxidation. Apply 2–3 coats of automotive-grade clear and allow full cure before installation.

Does this trunk use the factory latch mechanism?

Yes. This trunk is designed around existing factory latch and hinge locations, so your OEM latch hardware remains fully functional. No modification to the latch assembly is required — simply bolt the panel in place and test the action before final tightening.