Purelux Multi-switch Dashboard Controller Bluetooth/RF

The Purelux Multi-Switch Dashboard Controller is a very versatile and convenient switch panel that allows you to control up to eight different electrical devices, such as lights, beacons, engine fans, or even seat heaters, either directly from the switch panel, from the supplied wireless remote control, or from a mobile application installed on a smartphone.

The switch panel can be installed, for example, in the cabin of a vehicle, so that the lights and devices installed behind it can be easily operated while working. In addition, the wireless remote control and mobile application allow adjustments even in situations where the switch panel is not within reach, such as from outside the vehicle.

The switch panel allows front, rear, and side work lights as well as a beacon to be controlled separately, with all switches conveniently located in one place. The lights can be turned on and off individually, and the middle switch can be used to turn off all devices at once. All connected devices can be operated continuously, momentarily, or in flashing mode.

The panel has an RGB backlight that automatically adjusts to the ambient brightness, with selectable colours. The backlight can also be turned off by pressing the “Mode” switch once. Included are 45 pictogram stickers and 5 blank, cuttable stickers to clearly mark each switch. The backlit symbols shine clearly in the dark.

The operating mode of each switch can be changed by pressing the Mode button twice, selecting the desired switch, and confirming the function, eliminating the need for a separate flasher relay. The panel is also equipped with a memory function, so it powers back on in the same mode used before shutdown.

In addition to the panel itself, all connected devices can also be controlled with the included wireless remote control, which has dedicated buttons for all eight outputs. Operating modes for each button are set on the switch panel. The Bluetooth mobile app allows full remote operation and makes it easy to group devices for simultaneous control.

The panel has a maximum power rating of 600W at 12V or 1200W at 24V. Circuits 1–2 support up to 30A, circuits 3–4 up to 20A, circuits 5–6 up to 10A, and circuits 7–8 up to 5A. Each circuit is individually fused in the control box.

Key features

• Control up to 8 devices from the switch panel, remote, or smartphone app
• Three operating modes: continuous, momentary, or flashing
• RGB backlight with auto-brightness and selectable colour
• Includes 50 labelling stickers for clear switch identification
• Wireless remote control (RF up to 30 m) and Bluetooth app (up to 10 m)
• Memory function restores the last mode on restart
• Maximum load capacity 600W @ 12V / 1200W @ 24V
• Compact IP65-rated housing for demanding use

Delivery content

• Switch panel (8 switches)
• Fuse box
• Residual current device (60A)
• Remote control
• Remote control battery (CR2477 3V)
• Antenna
• 4-pole cable
• 2-pole cable
• Power cable
• 2 × mounting brackets for the switch panel
• Fuse box mounting bracket
• 50 marking stickers
• Screw set
• Cable ties
• User manual (FI/SV/NO/DK/EN)

Technical specifications

• Product: Purelux Multi-Switch Dashboard Controller Bluetooth/RF
• Purpose: Operating up to 8 devices such as work lights, side/rear lights, and beacons
• Operating voltage: 10–30 V
• Power rating: 600W @ 12V, 1200W @ 24V
• Maximum current: 60 A (Circuits 1–2: 30A / Circuits 3–4: 20A / Circuits 5–6: 10A / Circuits 7–8: 5A)
• Backlight: RGB, adjustable/switchable off
• Wireless range (RF): Up to 30 m
• Bluetooth range: Up to 10 m
• Switch panel size: 116 × 66 × 14 mm (W × H × D)
• IP rating: IP65
• Operating temperature: –40°C to +105°C
• Approvals: CE marked
• Other: Panel has a memory function, can also be controlled with SwitchPanel mobile app (Bluetooth)
• Warranty: 12 months

Connection instructions

• Power: Connect the red main power cable from the vehicle battery or another fixed power source to the residual current device, then to the fuse box at the red-marked terminal. Connect the black ground cable to the vehicle frame or other ground point, then to the black-marked terminal in the fuse box.
• Switch panel: Connect the supplied 4-pin cable between the panel and the fuse box.
• Excitation current: For ignition-switched operation, connect the excitation current cable to the cigarette lighter or ignition base. For always-on use, connect directly to the battery positive or other fixed power point. Attach the 2-pin excitation current cable to the fuse box.
• Devices: Connect lights or other electrical devices to outputs 1–8 in the fuse box, observing maximum circuit ratings.
• Remote control pairing: Press ON/OFF and one of the eight operation buttons on the switch panel simultaneously. The ON/OFF indicator will turn red. Then press the ON/OFF button on the remote control. The button indicators on the panel will flash three times to confirm pairing.
• Mobile app: Download the SwitchPanel app from Google Play, Apple App Store, or via the QR code included in the packaging and user manual.

Notes

A red LED next to a fuse indicates a blown fuse.

If the total power of connected devices exceeds the controller’s maximum (600W @ 12V or 1200W @ 24V), the outputs can be used to trigger relays instead. In this case, the controller provides only the excitation current, while the lights receive power through the relay wiring harness.

Switches can be programmed for continuous, momentary, or strobe flashing modes by pressing the Mode button twice and selecting the desired switch.