Illustrated Code

• T30 CHR: High level flush pipe kit including lever, rigid pull chain, flush pipes, reverse screw cistern connector, stopper and ornate brackets
• C5: High level cistern (incl. cistern fittings )
• P2: Low/high level pan

Additional Information

The high level level wc uses a standard low level pan ( P2 ) and specialed high level cistern, connected with a medium level flush pipe kit T30 CHR

The flush mechanism comes in two options : dual flush rod pull cistern C5, or single flush chain pull cistern C28PK

A special flush pipe kit that allows the cistern to be placed on a wall next to the pan is available : Angled Flush Pipe Kit T34 CHR

Low Level wc can be used where the soil pipe is located in the floor. The pan can be located over the soil pipe by cutting the horizontal flush pipe to length.

The cistern height can be varied by cutting the vertical flush pipe to length - maximum height is 2,380mm to the top of the cistern, minimum height is 1,625mm.

P trap standard height pan - height from floor to pan rim is 40cm.

Regal Height pan ( floor to pan rim height 48cm ) available : P16

Ceramic soil connection pipes : straight connector to the wall : C29. The S trap connector bending down to the floor : C26

Cistern can be used with optional decorative Ornate Brackets T32 CHR

High level wc can be used with standard Burlington toilet seats or with the Throne seats ( S14 & S15 )

Supplied with floor fixings.

Recommended to be used with cistern tank isolation valve W25

Water Inlet valve hole is located on the side of cistern tank.

Inlet valve (SP7)

Guarantee

Standards Information

Available Spare Parts

• SP459: Black rubber wedge for T30CHR
• SP82: Brass fixing nut for T30 CHR, T33 CHR, T34 CHR
• SP429: Buffer Clip for T30CHR without black rubber wedge
• SP104: Control bracket for T30CHR
• SP119: Decorative cover of cistern connection for T30 CHR & T33 CHR
• SP391: Extra parts in gold finish for SP7 cistern fittings
• SP7: Fittings for High Level Cistern including Cistern Lever
• SP97: Flush cone for HL cistern
• SP15: Handle for high level cistern from T30CHR kit
• SP13: High Level Cistern Lid for C5
• SP14: High Level Rod
• SP384: Inlet valve with G1, 2 chromed-Brass shank and nut for High lever cistern fittings (part of SP7)
• SP16: Long pull arm for High level cistern from T30CHR kit
• SP146: Pin screw for T30 CHR
• SP918: Plastic hole stopper of cistern fittings for high level cisterns
• SP169: Rubber insert for SP20 clip
• SP17: Screw fixing pack for pan and bidet
• SP105: Spares for T30CHR: allen key x 1, screw x 12, rawl plug x 12, rubber spacing washer x 4, pin screw x 1
• SP18: The bottom section of the H, L flush pipe
• SP103: Upper flush pipe for T30CHR
• SP95: Washers & plastic fixing nut for flush pipe

Specification

Downloads

Click for Instructions T30 CHR (English)

Click for Instructions C5 (English)

Click for Instructions T30 CHR (French)

Click for Instructions C5 (French)