Power your outdoor network with our CAT5e Direct-Burial Ethernet Cable, built for durable, interference-free Gigabit connectivity underground. Featuring eight 24 AWG solid copper conductors, a full foil shield with drain wire, swell-free HDPE insulation, and a UV-tough LDPE jacket, this cable ensures reliable performance for campus links, PoE camera feeds, and outdoor Wi-Fi access points, even in harsh moisture, UV, and EMI conditions.

Engineered specifically for direct-burial installations, this shielded cable combines waterproof protection with EMI/RFI blocking—essential for underground runs near power lines or in high-interference environments. The foil shield with tinned-copper drain wire eliminates crosstalk and packet loss, while the UV-rated LDPE jacket resists sunlight, moisture, and soil acids. Tested to 350MHz and exceeding ANSI/TIA-568.2-D standards, it delivers dependable Gigabit Ethernet performance in the most challenging outdoor conditions.

Key Features

• Full foil shield (F/UTP) blocks EMI/RFI interference from underground power lines
• Tinned-copper drain wire grounds the shield to eliminate crosstalk and packet loss
• Solid bare copper conductors (24 AWG) for superior performance
• UV-rated LDPE (Low-Density Polyethylene) jacket resists sunlight degradation
• CMX outdoor rating for direct burial and conduit installations
• Resistant to moisture, soil acids, and temperature extremes
• Swell-free HDPE insulation for reliable long-term performance
• 350MHz bandwidth exceeds ANSI/TIA-568.2-D standards
• Supports Gigabit Ethernet, Fast Ethernet, and 2.5GBase-T
• PoE compatible with minimal power loss over long runs
• Outperforms copper-clad aluminum (CCA) alternatives
• Sequential length markers for accurate measurements
• Available in pull-box or spool packaging options

Ideal Applications

• Direct-burial campus network backbones
• Underground runs between buildings
• Outdoor PoE security camera and CCTV installations
• Wi-Fi access point connections in remote areas
• Buried conduit runs exposed to moisture and EMI
• Agricultural and industrial facility networking
• Parking lot and perimeter surveillance systems
• Outdoor IP camera networks requiring interference protection
• Solar farm and remote site connectivity
• Underground installations near power infrastructure
• Long-distance outdoor PoE applications in high-EMI environments

Cable Type & Construction

• Standard: CAT5e
• Type: Direct Burial, Outdoor
• Shielding Type: F/UTP (Foil/Unshielded Twisted Pair)
• Shield Material: Aluminum foil
• Pairs: 4 twisted pairs
• Total Conductors: 8
• Installation: Direct burial, conduit, outdoor

Conductors

• Gauge: 24 AWG
• Material: Solid bare copper
• Configuration: Solid (permanent installation)
• Performance: Outperforms CCA alternatives, minimized attenuation

Shielding

• Shield Coverage: Full foil shield
• Drain Wire: Yes (tinned copper)
• Ground Function: Eliminates crosstalk and packet loss
• EMI/RFI Protection: Excellent - ideal for underground near power lines

Insulation

• Material: Swell-free HDPE (High-Density Polyethylene)
• Performance: Moisture-resistant, long-term reliability
• Design: No swelling for consistent performance

Performance

• Maximum Frequency: 350MHz
• Data Rate: Up to 2.5GBase-T
• Applications: Gigabit Ethernet (1000BASE-T), Fast Ethernet, 155Mbps TP-PMD/CDDI
• PoE Compatible: Yes
• Attenuation: Minimized for long outdoor runs

Jacket

• Material: UV-rated LDPE (Low-Density Polyethylene)
• Rating: CMX (Outdoor)
• UV Resistance: Superior protection against sunlight degradation
• Moisture Resistance: Excellent waterproofing
• Chemical Resistance: Resistant to soil acids and environmental contaminants
• Outer Diameter: 6.2mm ± 0.4mm
• Color: Black (typical for burial cable)
• Marking: Sequential length markers
• Durability: Long-lasting underground performance

Installation Rating

• Indoor Rated: N/A
• Outdoor Rated: Yes (CMX)
• Direct Burial: Yes - approved for underground installation
• Suitable Areas: Underground, direct burial, wet locations, conduit
• Environment: Moisture, UV exposure, EMI-prone areas, soil contact

Environmental Protection

• Moisture Protection: Waterproof LDPE jacket, swell-free insulation
• UV Protection: UV-rated jacket
• Temperature Range: -40°C to +60°C operating
• Soil Resistance: Yes - resistant to acids and chemicals
• EMI Protection: Foil shielding for high-interference environments

Packaging

• Spool Size: 1000ft
• Options: Pull-box or spool available
• Design: Tangle-free for efficient deployment

Compliance & Certifications

• Standards: ANSI/TIA-568.2-D
• Rating: CMX (Outdoor)
• Burial Approved: Direct burial rated
• Environmental: UV-resistant, weatherproof