Professional-grade polyamide epoxy thinner designed to optimise application performance, improve flow characteristics, and ensure a superior finish.

AndCoat Epoxy Thinner is a high-quality solvent blend specifically formulated for use with the AndCoat range of epoxy coatings and primers. Designed to improve spray application, enhance flow and levelling, and achieve optimum film formation, this specialist thinner helps professional applicators achieve consistent, high-quality finishes across a variety of industrial and commercial projects.

Suitable for use with epoxy primers, epoxy topcoats, and high-build protective coatings, AndCoat Epoxy Thinner can be used to adjust viscosity for conventional spray, HVLP, and airless spray applications where required by the technical data sheet.

In addition to thinning epoxy coatings, it is highly effective for cleaning spray guns, application equipment, brushes, rollers, and associated tools following use.

Key Benefits

• Specifically formulated for epoxy coating systems
• Improves spray application and atomisation
• Enhances flow and levelling characteristics
• Helps achieve a smooth, professional finish
• Suitable for conventional, HVLP, and airless spray systems
• Reduces application defects caused by incorrect viscosity
• Effective cleaning solvent for tools and spray equipment
• Compatible with AndCoat epoxy primers and topcoats
• Professional-grade industrial solvent

Recommended Uses

AndCoat Epoxy Thinner is recommended for:

• Epoxy primers
• Epoxy topcoats
• Polyamide epoxy coatings
• Industrial protective coatings
• Steel coating systems
• Metal fabrication projects
• Industrial maintenance painting
• Workshop and factory applications

Always refer to the relevant coating Technical Data Sheet for recommended thinning ratios and application guidance.

Application Guidance

Add AndCoat Epoxy Thinner gradually while stirring thoroughly until the desired application viscosity is achieved.

Typical thinning levels may vary depending on:

• Application method
• Ambient temperature
• Humidity conditions
• Coating specification
• Desired film build

Do not exceed the maximum thinning recommendations stated within the relevant product Technical Data Sheet.

Technical Information

Equipment Cleaning

For best results, clean all spray equipment, brushes, rollers, mixing containers, and tools immediately after use. Flush spray systems thoroughly with AndCoat Epoxy Thinner to prevent cured coating residues from damaging equipment.

Storage

Store in a cool, dry, well-ventilated area away from direct sunlight, ignition sources, sparks, and open flames. Keep containers tightly sealed when not in use.

Data Sheets

AndCoat Polyamide Epoxy Thinner MSDS