48" Grab Bars | Bradley 8120 Series

✅ 48" (1219 mm) length with 1-1/2" (38 mm) diameter tubing

✅ 18-gauge (1.2 mm) stainless steel with architectural satin finish

✅ Seamless tubing construction — bar ends welded to flanges for maximum strength

✅ Mandrel bending maintains uniform 1-1/2" diameter throughout full length

✅ 12-gauge stainless steel flanges — 3" diameter (0.1046" thick)

✅ 14-gauge stainless steel escutcheons — snap over flanges to conceal mounting screws

✅ 1-1/2" wall clearance — meets ADA graspability clearance requirements (§609.3)

✅ Mounting screws included — general-purpose fasteners provided; use appropriate anchors based on wall construction

✅ ADA compliant — meets ANSI A117.1, ADAAG, and UFAS requirements

✅ Bradex® program — ships in 3 business days on standard sizes

✅ Made in USA — Bradley Corporation, Menomonee Falls, WI

Why Choose the Bradley 8120-001480?

ADA Standards §604.5 require grab bars in every accessible toilet stall, and §608.3 covers accessible shower compartments — making them a code requirement in virtually every commercial, healthcare, and institutional facility. The Bradley 8120-001480 is the 48-inch variant of Bradley's 812 Series, one of the most widely specified commercial grab bar lines in North America. At 48" (1219 mm), it exceeds the ADA 42" minimum for toilet side walls — commonly specified for wider accessible stalls, extended shower walls, and facilities where maximum support coverage is the priority. Bradley's 812 Series is distinguished by its welded construction — the bar ends pass through the flanges and are welded for maximum structural integrity, rather than relying on friction or adhesive. The architectural satin finish resists corrosion and cleans easily with standard commercial disinfectants. As an authorized Bradley Low Price Guarantee dealer, TotalRestroom.com carries the full 8120 line with 48-Hour QuickShip on stocked sizes.

Key Features & Applications

• Welded Construction for Maximum Strength: Unlike grab bars that simply insert tubing into flanges, the Bradley 8120 passes the bar ends through the 12-gauge stainless steel flanges and welds them for permanent, maximum-strength attachment. All exposed welds are ground and polished to blend seamlessly. When properly mounted into structural backing, the 8120 meets and exceeds ANSI A117.1, ADA, ADAAG, and UFAS structural requirements.

• Mandrel-Bent Seamless Tubing: The 8120's 18-gauge seamless stainless steel tubing is shaped using a mandrel bending process that maintains a perfectly uniform 1-1/2" diameter through all bends — no kinking, no thinning, no weak spots. The result is consistent grip surface and predictable structural performance throughout the bar's full length.

• Extended Reach for Wider Stalls and Shower Walls: At 48" (1219 mm), this bar exceeds the ADA 42" minimum for toilet side walls and is used in wider accessible stalls, extended shower walls, and facilities where specifiers go beyond the code minimum for enhanced usability. Satisfies and exceeds the §604.5.1 side-wall requirement.

• Mounting Hardware Included: Unlike many grab bar brands, Bradley includes (6) stainless steel sheet metal screws with every 8120. Installation requires a power drill, carbide tip drill bit, and phillips driver — all mounting points must fasten into structural wood backing of minimum 2" thickness. Avoid drilling through grout where possible; drill through tile.

Bradley 8120 vs. Bobrick B-6806 — How Do They Compare?

Satin vs. Peened — Which Finish Do You Need?

The 8120-001480 (satin) is the standard choice for commercial restrooms, offices, healthcare corridors, and any application where appearance is a priority. The smooth architectural satin surface cleans easily and matches virtually any restroom hardware finish.

The 8122-001480 (peened) has a textured surface for improved wet-hand grip — preferred for showers, pool facilities, locker rooms, and anywhere users regularly have wet or soapy hands. Both versions are identical in diameter, gauge, and structural construction.

Frequently Asked Questions

• Does this grab bar come with mounting hardware? Bradley includes general-purpose mounting screws with every 8120 grab bar. These are intended for solid wood in-wall backing of minimum 2" thickness. For metal studs, concrete, or masonry installations, use appropriate anchors for your specific substrate. Always mount into structural backing — never into drywall alone.

• When would I specify a 48" grab bar instead of a 42"? The 48" bar is used when a wider stall layout requires more support range, when architects specify beyond the ADA minimum for better usability, or for shower applications where a longer bar provides better wall coverage. ADA §604.5.1 requires a minimum 42" side-wall bar — the 48" Bradley 8120 satisfies and exceeds that requirement.

• Is the Bradley 8120 ADA compliant? Yes. When properly mounted, the Bradley 8120 meets and exceeds the requirements of ANSI Standard A117.1, ADA and ABA Accessibility Guidelines (ADAAG), and the Uniform Federal Accessibility Standard (UFAS). The 1-1/2" diameter meets §609.2 graspability requirements and the 1-1/2" wall clearance meets §609.3.

• What is the difference between Bradley 8120 and Bobrick B-6806? Both are 1-1/2" diameter, 18-gauge Type 304 satin stainless grab bars with concealed mounting. Key differences: Bradley's bar ends are welded through the flanges for maximum structural attachment; Bradley includes mounting hardware while Bobrick does not; Bradley's peened version is the 8122 series while Bobrick's is the B-6806.99. Both are ADA compliant and widely specified in commercial construction.

• Can this bar be mounted horizontally, vertically, or at an angle? Yes — the Bradley 8120 can be installed in any orientation. ADA §604.5 specifies horizontal bars for toilet applications; §608.3 covers shower orientations. Verify the required orientation with your applicable building code before installation.

48" (1219 mm) straight grab bar, 1-1/2" (38 mm) diameter. Exceeds the ADA minimum side-wall length of 42" per §604.5.1. 18-gauge satin-finish stainless steel with concealed mounting. Bar ends welded through 12-gauge flanges for maximum strength. Mounting hardware included. View the full Bradley 8120 series for all available lengths.