The One Cut & Finish P6.02 is a machine polish for the permanent removal of polishing haze, holograms and scratches as well as sanding from grit P 2000 with a simultaneous sealing effect. A brilliant and durable high-gloss finish is created through the use of homogeneous abrasives. The innovative One Cut & Finish P6.02 combines an optimal ratio of abrasiveness and gloss for economical and effective work in vehicle preparation. The One Cut & Finish P6.02 is economical, easy to polish, and easy to wipe off. Contains carnauba wax and non-volatile silicones. Grinding level: 6.0 Gloss level: 8.0 To achieve optimal results, we recommend processing with our One Cut Pad and a high-performance eccentric (min. 15 mm stroke) or with an eccentric with forced rotation. For optimal dosing, spread five pea-sized drops evenly on the pad. Distribute the polish evenly over the surface with the machine at the lowest speed and then polish crosswise with medium pressure. Do not alternate the sponges used for this product with other products. For the scratch-free removal of polish residues, we recommend our ultrasonically cut Polish & Sealing Towel. Shake before use. Check for suitability and compatibility before use. Do not apply to hot surfaces. Protect from frost and excessive heat. Do not use on painted plastics and rubber.