Protect your tenants, meet your duty of care, and stay compliant with Awaab’s Law.
The Zinsser MouldAway Kit is a complete four-step mould treatment and prevention system designed to support social housing providers, landlords and maintenance teams in tackling damp, mould and fungal hazards internally - quickly, effectively and safely.

Developed around the core principles of Prep, Prime and Protect, each kit contains the four essential Zinsser products used by local authorities and housing associations across the UK to combat mould in high-risk areas such as kitchens, bathrooms and poorly ventilated rooms.

Available in kit sizes suitable for 10m², 25m² and 50m² areas, this solution ensures rapid compliance with the first phase of Awaab’s Law, which mandates fast action against mould and emergency hazards in social housing.

Ideal For:

• Social landlords & housing associations

• Local authority maintenance teams

• Property managers and facility contractors

• Private landlords preparing for future legislation

What’s in the Kit?

1. Zinsser Universal Degreaser & Cleaner
   Prepares contaminated surfaces by removing grease, dirt and residual mould matter for optimum adhesion.

2. Zinsser Mould Killer & Remover
   Fast-acting biocidal formula that eliminates mould, fungi and algae at the source.

3. Zinsser B-I-N® AQUA Primer
   A low-odour, water-based stain-blocking primer that seals and isolates residual mould staining before overcoating.

4. Zinsser PermaWhite® Interior Paint
   Mould-resistant, durable and washable finish formulated with biocides to prevent future regrowth - ideal for high-humidity spaces.

Select a colour you'd like in the Perma-White Interior and we'll tint your kit to your specification! 

Surface Preparation

1. Clean all surfaces with Zinsser Universal Degreaser & Cleaner to remove grease, soap film and dirt. Rinse thoroughly and allow to dry.

2. Treat visible mould, mildew, algae or fungi using Zinsser Mould Killer & Remover. Spray on affected areas and allow to dry fully.

3. Prime bare plaster or porous surfaces with B-I-N Aqua Primer depending on requirements.

4. For previously painted surfaces, ensure adhesion by lightly abrading glossy areas. Remove any loose coatings or contaminants.

Technical Data 

Directions for Use

Step 1: Degrease
Apply Zinsser Universal Degreaser & Cleaner using a cloth or sponge. Scrub surfaces, rinse and let dry.

Step 2: Kill Mould
Spray Zinsser Mould Killer & Remover onto mould-affected areas. Allow to fully dry. Do not rinse.

Step 3: Prime 
Apply primer to bare, porous or stained areas. Let dry thoroughly before topcoat.

Step 4: Paint
Apply 2 coats of Zinsser PermaWhite Interior Paint. Use a synthetic brush, roller or sprayer. Wait 2 hours between coats. Do not scrub for 7 days post-application.

Data Sheets