Nitro X1 Extra Boost Cut Compound – Cut 9 Body Shop Compound

Symplex® Nitro X1 Compound (Cut 9 Ultra Leveling) is a high-cut compound engineered for moderate to heavy grit sanding mark removal. Powered by Symplex’s Ultimate Premium Abrasives and Diminishing Abrasive Technology, it delivers strong correction while finishing with improved clarity—making it a true “Body Shop Real One Step Compound” for fast, professional workflows.

Nitro X1 produces minimal swirls, very low dust, no splatter, and is trim-safe (formulated to leave no white residue on plastic trims). It is also body shop safe (no silicone, no fillers) and formulated specifically for the new generation of clear coats.

Key Features & Benefits

• High Cutting Power (9/10): Removes moderate to heavy sanding scratches.
• Ultimate Premium Abrasives: Symplex proprietary precision-milled abrasives.
• Balanced Formula: Strong correction with improved clarity.
• Minimal Swirls & Low Dust: Clean working for professional results.
• Trim-Safe, Splatter-Free: Helps protect work areas; does not stain plastic parts.
• Optimized for Rotary Polishers: Best efficiency with direct-drive machines.
• Body Shop Safe: No silicone and no fillers.

Abrasive Technology & Finish Quality

• “BODY SHOP ABSOLUTE” abrasives: Developed to remove sanding scratches and car wash marks while finishing with outstanding gloss and D.O.I (Distinctness of Image).
• Ultra Cut Diminishing Abrasives: Provides ultra-fast correction with an outstanding finishing action.
• Water-based: Listed as WATER BASED in technical specifications.

How to Use

1. Shake well before use.
2. Apply 3–4 pea-sized drops to a wool, microfiber, or foam cutting pad.
3. Work a small section with a rotary polisher using moderate pressure.
4. Continue polishing and allow abrasives to fully diminish to achieve clarity.
5. Wipe off residue with a clean microfiber towel.
6. If desired, follow with Micro SHR Paint Refiner for an additional/perfect finish.

Recommended Machine Speeds (From Technical Specs)

• Correction / leveling: Buff at 1500–2000 RPM (apply enough pressure on the first pass).
• Finishing / ultra-brightness: Apply a few drops and use a finishing foam pad at low speed around 1200 RPM.

Recommended Pads & Machines

• Machine type: Optimized for rotary polishing machines (electric or pneumatic).
• Pad options (listed in technical specs):
  • Symplex® Turbo Extreme pad two faced (P/N 134-0007-UN)
  • Piranha pad (P/N 134-0003-UN)
  • Flex pad (P/N 134-0004-UN)
  • For additional ultra gloss: Symplex Turbo Foam Pad (P/N 133-0007-UN)

Specifications

Container & Packaging

• 16 oz & 32 oz: High-strength PET bottles.
• Gallon (128 oz): High-density polyethylene (HDPE).
• Metered plastic cap/lid: Helps prevent contamination and drying, and supports accurate dosing.

Safety & Handling

• Warning: Causes skin irritation (H315) and may cause drowsiness or dizziness (H336).
• PPE: Wear protective gloves and eye/face protection. Use only outdoors or in a well-ventilated area.
• If on skin: Wash with plenty of water.
• If inhaled: Move to fresh air and keep comfortable for breathing; seek help if unwell.
• If swallowed: Rinse mouth (if conscious). Do NOT induce vomiting.
• Note: Spilled product may create a slip hazard. Keep container tightly closed and store in a well-ventilated place.