Andrews CleanEdge Ceramic is a premium water-based interior paint formulated with advanced ceramic technology to deliver exceptional durability, superior opacity and a flawless finish.

Designed for modern living spaces, CleanEdge Ceramic offers Class 1 scrub resistance, fast drying times and excellent stain resistance, making it ideal for high-traffic areas such as kitchens, bathrooms, hallways and commercial interiors.

Its mould and mildew resistant formulation combined with outstanding adhesion ensures long-lasting performance even in high humidity environments. The high opacity ceramic system provides excellent coverage, reducing the need for multiple coats while delivering a smooth, professional finish.

Low odour and easy to apply, CleanEdge Ceramic is suitable for both professional decorators and high-end residential projects where durability and aesthetics matter.

Surface Preparation

All surfaces must be clean, dry and sound before application.

Previously Painted Surfaces

• Remove any flaking, peeling or unstable coatings.
• Key glossy or satin surfaces with fine abrasive paper.
• Clean thoroughly to remove dust, grease or contaminants.
• Spot prime bare patches as required.

New Plaster

• Allow plaster to fully cure (minimum 4 weeks).
• Apply a suitable mist coat before full application.

High Humidity Areas

• Treat any mould growth with a suitable fungicidal wash and allow to dry before painting.

Surfaces should be dry and free from dust prior to application.

Technical Data

Finish: Durable ceramic matt
Coverage: Approx. 10–12m² per litre (depending on substrate)
Touch Dry: 30 minutes
Recoat: 2 hours
Application Temperature: 5°C – 30°C
Application Methods: Brush, roller or spray
Scrub Rating: Class 1
VOC: Low
Thinning: Do not thin unless spraying (minimal water if required)
Clean Up: Water

Suitable for interior walls and ceilings including plaster, drywall, previously painted surfaces and prepared masonry.

Directions for Use

1. Stir thoroughly before use.

2. Apply evenly using a quality brush, roller or airless spray.

3. Maintain a wet edge to avoid lap marks.

4. Allow approximately 2 hours between coats.

5. Two coats recommended for best results.

Avoid application below 5°C or in excessively humid conditions.

Data Sheets

Andrews CleanEdge Ceramic TDS