Handle cover with heater A product with a control switch attached to the main body for easy wiring No need to replace the grip! Easy to install! The gradation can be adjusted in 3 levels! Equipped with a rapid heating mode that is useful on cold days

FS-JAPAN Handle cover with heater A winter item packed with heat retention, windproof, and water repellent functions. Highly versatile design! Can be installed on a wide range of car models! No need to replace the grip! Easy to install! The control switch is located on the handle cover body, so you don't have to worry about attaching the switch. Equipped with a rapid heating mode that is useful on cold days. [How to operate] Press the switch on the handle cover on both sides to turn on the power and heat the inside of the handle cover. To do. Power ON: Press the switch for about 3 seconds until the red light flashes. Power OFF: Keep pressing the switch until the pilot light goes out (about 3 seconds). Equipped with an adjustable LED silicon temperature controller. a. Red lamp flashing - Rapid heating (Each time the power is turned on and off, it will enter this stage. After 5 minutes, it will automatically enter the medium temperature stage) b. Red lamp - High temperature c. White lamp - Medium temperature d. Blue Lamp - Bass Adjustable temperature at any time: Cycles through temperature settings each time you press power. After use, press the left and right switches until the lamp goes out. *Please be careful not to forget to turn off the switch as it does not have an automatic power shutoff function* [Main body material] Front: Synthetic leather polyurethane Back: Special conductive heating fiber Insert a sponge between. [Installation method] 1. Connect the terminal of cable A to the motorcycle battery. Connect the red terminal to the positive side and the black terminal to the negative side. (Refer to the diagram in the photo) 2. Connect the other end of cable A to cable B. Secure the excess cable to the vehicle body with a band or tape to prevent it from getting caught. 3. Connect the other terminal of cable B to the main body of the left and right handle covers. [Cable standard] 20awg (30Ω 11.1V 4W) *Caution* If the regulator is modified, the battery may become abnormal and the fuse on the handle cover may blow. For 12V only, cannot be installed on 6V or battery-less vehicles. Performance may not be achieved if the battery capacity is low. Due to the position of the mirror, such as Cygnus


Manufacturer: ‎FS-JAPAN
Brand: FS-JAPAN
Model name: ‎‎FS-HC-Heat
Packing size: ‎34.9 x 26.6 x 9.2 cm; 490 g
Manufacturer reference: ‎FS-HC-Heat
Discontinued by the manufacturer: ‎No
Certification: ‎None
Item weight: ‎490 g