Illustrated Code

• T71 CHR: Chrome Aluminium Low Level & Medium Level Cistern including lever cistern fittings
• T33 CHR: Medium level flush pipe kit including medium ornate brackets in chrome
• P5: Close coupled pan

Additional Information

The medium level wc uses a standard close coupled pan and close coupled cistern, connected with a medium level flush pipe kit T33 CHR

The distance from the wall to the soil pipe is fixed and cannot be extended, except by using the extended depth cistern C30 ( this moves the pan an extra 30mm forwards)

The cistern height can be varied by cutting the vertical flush pipe to length - maximum height is 1,425mm to the top of the cistern, minimum height is1,125mm.

Water Inlet valve hole is located on the base of cistern tank on the right hand side

Bottom inlet valve (SP5A). Back inlet valve available as optional item (SP511).

SP511 : Back entry kit for C1/C3/C24, including back entry inlet valve with flexible hose and plug

Dual flush cistern fittings with ceramic lever on the right.

Press lever down for 6 litre flush and up for 3 litre flush.

P trap standard height pan - height from floor to pan rim is 40cm.

Ceramic soil connection pipes : straight connector to the wall : C29. The S trap connector bending down to the floor : C26

Cistern can be used with optional decorative Ornate Brackets T32 CHR

Medium level wc must be used with standard Burlington toilet seats

Supplied with floor fixings.

Recommended to be used with cistern tank isolation valve W25

Guarantee

Standards Information

Available Spare Parts

• SP11: 51cm Cistern Lid For C1 & C2
• SP511: Back entry kit for C1, C3, C24, including back entry inlet valve with flexible hose and plug
• SP506 bag of fixings for T33 CHR: Including screws, washers, plastic plugs, allen key
• SP82: Brass fixing nut for T30 CHR, T33 CHR, T34 CHR
• SP8: Ceramic Cistern lever for Close Coupled, Low Level Cistern
• SP84: Cistern flush valve with control cable for cistern fitting SP5 (excluding lever and inlet valve)
• SP20: Clip for T33 CHR ML kit
• SP973: Cone shaped washer, plastic washer and plastic fixing nut of cistern fittings C1, C2, C3, C4, C30, C1D
• SP119: Decorative cover of cistern connection for T30 CHR & T33 CHR
• SP390: Extra parts in gold finish for SP5 cistern fittings
• SP136: Flush cone washer for T33 CHR
• SP187: Flush pipe of T33CHR
• SP5A: Lever Flush Bottom Entry cistern fitting with ceramic lever
• SP898: Pan decoration plate (including the screws, washers and fixing nuts) of product T33 CHR
• SP169: Rubber insert for SP20 clip
• SP17: Screw fixing pack for pan and bidet
• SP802: The bigger stopper for SP5A
• SP460: Thick rubber washer for T33CHR

Specification

Downloads

Click for Instructions T33 CHR (English)

Click for Instructions T33 CHR (French)