• Higher Top Speeds: Reduced drag allows the engine to reach its rated RPM more easily.

• Lower Fuel Costs: A cleaner prop moves water more efficiently, requiring less horsepower to maintain cruise speeds.

• Environmentally Friendly: Because it contains no copper, tin, or other biocides, it is 100% legal in all waters and safe for the marine ecosystem.

Why Choose the 1250ml Large Kit?

The PCK-1250 is essentially two medium kits (PCK-625) combined, offering 25% more product volume than competitive brands at this price point. It is the correct choice for

• Propellers: Single or dual props ranging from 36” to 48” in diameter.
• Running Gear: Full coverage for shafts, struts, rudders, trim tabs, and thrusters.

• Multi-Prop Applications: Ideal for twin-engine vessels in the 40’–60’ range that need to coat both props and all associated hardware.

The "Hot Bond" Application Process

The key to PropGlide’s durability is the chemical "hot bond" between the etching primer and the silicone topcoat. The system is designed for a specific application window: the clear topcoat must be applied within 5 to 15 minutes of the second primer coat to ensure the layers fuse together permanently.

Technical Specifications

In the Box: PCK-1250 Kit

• (2) 300ml Primer Base (Part 1): High-adhesion etching primer.

• (2) 75ml Primer Hardener (Part 2): Activator for the primer base.

• (2) 250ml Clear Topcoat: The super-slick foul-release finish.

• (1) Detailed Application Guide: Step-by-step instructions for DIY or Pro use.

Pro-Tip for a Successful Application:

"Surface preparation is 90% of the job. You must sand the metal to a bright, shiny finish using 60-80 grit sandpaper to create a 'mechanical tooth' for the primer. Once sanded, clean the surface with Acetone using the 'two-rag' method: wipe with one wet rag and follow immediately with a dry, lint-free rag. Never touch the cleaned metal with bare hands, as skin oils will cause the coating to peel."

Ideal Applications

The PropGlide Prop & Running Gear Coating Kit – 1250 ml (PCK-1250) is perfect for:

• Large propellers and drive units

• Shafts, struts, and rudders

• Trim tabs and outdrive surfaces

• Offshore fishing boats

• Cruisers and performance boats

• Sailboats with submerged metal gear

Why Choose PropGlide

PropGlide’s specialized formulation is engineered for marine environments where tough fouling challenges meet performance expectations. Instead of traditional antifouling paints that rely on biocides, PropGlide uses a non-toxic fouling-resistant surface to keep running gear cleaner longer. This means better efficiency, less maintenance, and peace of mind for boaters who want optimal performance from their propulsion system.

Protect and elevate your boat’s performance with the PropGlide Prop & Running Gear Coating Kit – Large (1250 ml) – PCK-1250, the choice of savvy boaters looking for long-lasting fouling control and smoother trips on the water.