Special product for ZC33S Metal color Stiff shift feel Recommended for simultaneous use with ``TM-SQUARE Reinforced Engine Mount''

A part that changes the shift feel of ZC33S Swift more directly. That is TM-SQUARE shift color. In the case of the Swift, the shift lever and transmission case are connected by two wires, and gears are changed via these wires when the shift lever is operated. Rubber bushings are used in several locations on the ZC33S to suppress vibration and noise. First of all, the shift lever base, which is the base of the shift lever, is fixed to the body at four points, but all of them are not rigid, but are floating mounts with rubber bushings. Rubber bushings are also used in the shift wire brackets that are installed to secure the shift wires. Of course, rubber bushings offer better comfort, such as suppressing mechanical noise, but the shift lever base wobbles every time you change gears, and the amount of movement of the shift wire also changes due to the "swing" of the rubber bushings. This results in a shift feel that is "mushy" and lacks rigidity. TM-SQUARE shift collar uses a metal collar instead of these rubber bushes and rigidly fixes the shift lever base and shift wire bracket to achieve a direct and rigid shift feel. . Note: When using the TM-SQUARE shift collar ZC33S SPEC, the clearance of each part of the shift linkage will be reduced, so the gear feel (especially in 1st and 2nd gears) may feel a little harsh when the gear is cold. Also, this symptom will disappear when the transmission oil temperature rises a little.


Manufacturer: ‎TM-SQUARE
Brand: ‎TM-SQUARE
Model name: ‎TMSC-AG3611
Packing size: ‎21.1 x 10.5 x 2.5 cm; 170 g
Product model number: ‎TMSC-AG3611
Exterior condition: ‎Metal
Certification: ‎None
Product weight: ‎170 g