These directions are on the back of each Cap-M-Quik® box.

1.) Assemble

Place Cap-M-Quik® capsule holder onto a large piece of paper.
Place spacers on end post facing the center.
Set the holder on the four corner posts resting on spacers above base.

2.) Load

Manually separate empty caps placing the longer half into holes.
(Top of empty capsule half should be below surface of holder.)

3.) Fill

Pour powdered herbs or vitamins onto holder spreading substance evenly with card, completely filling all capsules.

4.) Tamp

The accessory Tamping Tool (Tamper) can be used at this point to simultaneously pack contents of caps. Remove excess substance carefully by scraping away from the holder and onto the paper. Use the tamper to pack the contents of the capsule filling them completely. Refill capsules and repeat process.

5.) Cap

Turn the end spacers 90 degrees. The holder will fall down, exposing the upper half of filled caps. Manually replace the top cap, and remove your now-filled and finished capsules!