Items made to order | Usually ships in 2-5 business days

Based in Philly | Est. 2018

**GLOVE PULLS AND WRIST SHOCK CORD ARE NOW BLACK.  SOME HARDWARE HAS CHANGED**

Garage Grown Gear review here.

Perfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  
    
    *Due to dye-sublimation, colors may vary slightly.

    Designed, printed and sewn in Philadelphia, PA 

Care Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.
        Hand wash with a gentle soap.  
        Do not iron.  
        Do not wring.  
        Drip-dry in shade.
        Do not bleach.
    
Specs:
    Dimensions:
        Sm/Md: ~ 11.4" x 7.4"
        Lg/Xl: ~ 12.2" x 7.5"

    Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm/Md size will fit most people with a base measurement of 6.5" - 7.75". A Lg/Xl size will fit most people with a base measurement of 7.5" - 8.25".

    Weight:  
        Sm/Md: 1.07 oz / 30 grams
        Lg/Xl: 1.21 oz / 34 grams
        
    Materials:
        Sublimated 3.3 oz/sqyd Challenge Sailcloth TX95
        Sublimated 1.43 oz/sqyd Dyneema Composite Fabric
        3M 9471LE Dyneema Tape
        1/8" Shock Cord
        1/2" Firm Nylon Grosgrain Ribbon
        2 mm Neon Yellow Spectra Glove Pull
        Cord Toggle
        Cord Pull
        

    Features:
        Extremely Water-Resistant (as close to waterproof as you can get without welded seams)
        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)
        One-handed wrist cinch fastener to tighten/loosen each mitt
        Fully-Taped Seams
        Large glove pull on each mitt for ease of donning
        Shock cord wrist cinch to prevent water ingress
        Loops for attaching mitten hooks
        Unique Colorways
        Ultralight Construction