Keim Contract Plus is a highly fill silicate based priming coat can be used as a bonding bridge between sound, existing coatings and Keim Mineral Paints. Kiem Contact Plus contains glass fibres and silicate minerals in consistent grains, sizes and shapes. 

Keim Contact Plus is designed to fill-up cracks of up to 0.5mm width.

Key Features 

• Equalises textures
• Resistant to UV
• Non-flammable
• Breathable finish
• Cradle to Cradle Certified Silver

Preparation & Application

Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed.

Application
Dilute Keim Contact Plus with the appropriate system dilution at 1 lt per 10 kg. Apply uniformly with brush or roller. Application conditions Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.

Data Sheet

Keim Contact Plus TDS