PropGlide Prop & Running Gear Coating Kit – Medium – 625ml

MPN: PCK-625

Protect your propellers and running gear from marine growth with the PropGlide Prop & Running Gear Coating Kit. This silicone-based foul-release coating creates an ultra-slick surface that prevents barnacles, algae, and other growth from adhering—helping maintain peak performance, fuel efficiency, and smooth operation.

Unlike traditional antifouling paints, PropGlide does not contain biocides and won’t flake or build up. Growth that does appear can be easily wiped away while the boat is in the water. The Medium 625ml kit is ideal for multiple propellers or a complete set of running gear, making it a popular choice for powerboats, sailboats, and performance vessels.

• Complete System: This is a multi-step kit that includes everything needed for the priming and final coating stages.

• Increased Performance: By keeping your prop clean, it ensures maximum thrust and reduces engine strain, often resulting in lower fuel consumption.

• Compatibility: Safe for use on all underwater metallic surfaces, including bronze, stainless steel, and aluminum alloys.

• Coverage: The 625ml Medium Kit is typically sufficient for a pair of 24–30 inch propellers or multiple smaller running gear components (struts, shafts, and rudders).

In The Box

• 1 x 250ml Primer Base

• 1 x 50ml Primer Hardener

• 1 x 325ml Clear Topcoat

• Detailed Application Instructions

⭐ Key Features

• Non-toxic, silicone-based foul-release coating

• Prevents barnacles and marine growth on underwater metal

• Improves performance, speed, and fuel efficiency

• Growth wipes off easily—no scraping required

• Does not flake, chip, or build paint thickness

• Suitable for bronze, stainless steel, aluminum, and composite props

• Medium 625ml kit covers multiple props or extensive running gear

🚤 Ideal For

• Propellers (inboard & outboard)

• Shafts, struts, rudders, and trim tabs

• Powerboats and sailboats in salt or brackish water

• Boat owners looking for eco-friendly antifouling protection

📊 Specifications

Application Tips for Success

• Surface Prep is Critical: The metal must be abraded (sanded) to a "bright metal" finish and thoroughly degreased before the primer is applied.

• Timing the Topcoat: The clear topcoat must be applied while the primer is still "tacky." Following the re-coat window in the manual is the most important step for long-term adhesion.

• Temperature Matters: Apply in dry conditions between 60°F and 85°F for the best chemical bond.

⚓ Why Choose PropGlide

PropGlide is trusted worldwide for its clean, effective alternative to antifouling paint. It protects expensive running gear, reduces maintenance, and keeps boats performing at their best—without harming the marine environment.”

Manufacturer : PropGlide USA
Manufacturer Part No : PCK-625