Shopping security
Keim Concretal Dilution (Concretal Fixativ)
Reacts chemically with the surface. The product comprises of liquid potassium silicate and stabilisers.
This product/system requires site trials - Although readily available, please ensure a specification has been issued after site trials have taken place.
The colour and degree of dilution affects the final finish and this must be known before purchase.
For further information please contact our technical team on 01902429190 or email [email protected]
Key Features
Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using KEIM Mineral Paints may proceed.
KEIM Concretal Dilution should be applied by brush or roller, working well into all surfaces. After a minimum period of 12 hours the KEIM Concretal W or KEIM Concretal Lasur system may be applied.
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
Approx. 0.1 lt/m2.
Consumption rates are offered for guideline purposes only and are quoted for smooth rendered surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.
Clean tools with water immediately after use.
Ships within 48 hours · Estimated delivery Jun 23 - Jun 28
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order