Features:

• • Supports 2-14S & 200A Cont, 400A Burst
• • DroneCAN Communication Protocol
• • Small & Compact Design
• • Two 5V Output with Independent BEC IC and Circuitry
• • Separated Sensor and BEC Board to Minimize Electrical Noise Interference
• • Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)
• •  High Accuracy Temperature Sensor for Temperature Monitor
• • High-Efficiency Aluminum Heat Dissipation Shell

Specifications:

• • Input Voltage: 2S-14S
• • Processor：STM32F405RG 168MHz 1024KB Flash 196KB RAM
• • Voltage input: 7~60.9V (2S~14S)
• • Continuous current:200A
• • Burst current
  • • 400A @ 25℃ 1 sec
  • • 1000A @ 25℃ < 1 sec
• •Max current sensing: 376A
• •Voltage accuracy: ±0.1V
• •Current accuracy: ±5%
• •Temperature accuracy:±1℃
• •Power port output: 5.3V/3A each port
• •Protocol: DroneCAN
• •Operating temperature :-25℃~105℃
• •Firmware upgrade: Support
• •Calibration: Support
  
  

Pinout:

Interface Type:

• • Power & CAN Port: Molex CLIK-Mate 2mm 6Pin
• • Battery IN/OUT Options:
  • - XT90 Connectors
    
  • - Tinned Wires
  • - XT90 & Ring Terminals

LED Status:

• • Flashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash
• • Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection
• • Flashing slowly (one-second intervals): CAN is successfully connected

Specifications：

• • Size: 45mm×41mm×26mm (Not Include Cable)
• • Weight: 185g (Include Cable)