SHS1202X — SHS1000X / SHS800X Series · Handheld Isolated Oscilloscope — 100/200 MHz, IP51, Battery-Powered

Key Features At A Glance

• 2 analog channels, 200 MHz bandwidth
• Sample rate 1 GSa/s (500 MSa/s dual-ch)
• 8-bit ADC vertical resolution
• Record length 12 Mpts
• Built-in 6000-count true-RMS DMM with DCV, ACV, DCI, ACI, R, diode, capacitance, continuity
• Includes Sample and Measurement Loggers (Recorder mode)
• 5.6" TFT-LCD (640×480) display; 8 + 3 one-button shortcuts
• UL2054 certified 6900 mAh lithium battery (external charger)
• IP51 rating; UL61010-1, UL61010-2-030, UL61010-2-033 compliance
• Isolated, IP51, 6000-count DMM, 6900 mAh battery

Overview

The Siglent SHS1202X is a 200 MHz, 2-channel digital oscilloscope from the SHS1000X / SHS800X Series — part of Siglent's Super Phosphor Oscilloscope family. In summary, this is a 8-bit-resolution, 1 GSa/s (500 MSa/s dual-ch)-sample-rate instrument intended for general benchtop signal capture, mixed-signal debug, serial-bus decoding, and power-supply characterization.

What is the SHS1202X used for?

The SHS1202X is used to capture, view, measure, and analyze electrical waveforms up to 200 MHz. Typical applications: embedded system debug, power-rail characterization, motor and inverter waveform inspection, audio and sensor signal analysis, education, and serial-bus decoding for the protocols listed below.

What can it trigger on and decode?

Edge, Slope, Pulse Width, Window, Runt, Interval, Time-out (Dropout), Pattern. Video trigger / HDTV. Standard serial: I2C, SPI, UART, CAN, LIN.

Factual grounding — measurement and analysis

Data analysis functions include: Search and Navigate; History waveform record up to 80,000 frames; 38 auto measurements with statistics, zoom, gating, Math, History, Reference; 1 Mpts FFT with peaks and markers; Math (+, −, ×, ÷, ∫, d/dt, √). Acquisition and measurement: 12 Mpts record memory with all sampled points available to Math; Security Erase mode; SCPI remote control over isolated USB. The SHS1202X delivers 1 GSa/s (500 MSa/s dual-ch) real-time sampling and 12 Mpts of record length — sufficient to capture long-duration events while preserving timebase resolution for zoom inspection.

Industry positioning

Siglent's handheld line is the value-tier field instrument — IP51-rated for industrial use but, importantly, not CAT III/IV certified, so it is not a Fluke ScopeMeter substitute on mains or distribution panels. The right call for low-voltage electronic service, automotive electronics, and field engineering where occasional waveform viewing is needed alongside a DMM.

Accessories Supplied

• SHS-series handheld oscilloscope with built-in 6000-count DMM
• UL2054-certified 10.8 V / 6900 mAh lithium battery pack
• External charger / AC adapter
• Passive probes (one per channel, model-specific)
• DMM test lead set
• USB cable (isolated USB host/device)
• Quick Start guide; Certificate of calibration

Product Core & Specifications

The SHS1202X acquisition and analysis specifications are listed below. Where the SHS1000X / SHS800X Series family shares architecture across its members, model-specific differences are concentrated in bandwidth, channel count, and (for HD-series) ADC vertical resolution.

Acquisition

Trigger and Serial Decode

Edge, Slope, Pulse Width, Window, Runt, Interval, Time-out (Dropout), Pattern. Video trigger / HDTV. Standard serial: I2C, SPI, UART, CAN, LIN.

Math, Measurement, and Analysis

12 Mpts record memory with all sampled points available to Math; Security Erase mode; SCPI remote control over isolated USB.

Data analysis: Search and Navigate; History waveform record up to 80,000 frames; 38 auto measurements with statistics, zoom, gating, Math, History, Reference; 1 Mpts FFT with peaks and markers; Math (+, −, ×, ÷, ∫, d/dt, √).

Calibration (Factory New)

All Factory New Siglent oscilloscopes ship with a factory calibration and certificate as standard. Optional upgrade calibration paths (NIST Traceable, NIST Traceable with Full Data, ISO/IEC 17025 Accredited) can be added at the time of order — please specify your required calibration tier on the order, and ValueTronics will route the unit through the appropriate calibration lab prior to shipment.

This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.