Keim Soldalit Fixativ is sol-silicate binding agent and dilution, and to consolidate friable surfaces as a binder coat and as a dilution coat for the Keim Soldalit system as required. 

Key Features

• Acts as a primer for highly absorbent substrates
• Weather resistant and UV resistant
• Non-flammable
• Water vapour permeable, microporous
• No solvents and plasticisers added
• Cradle to Cradle Certified Silver

Preparation & Application

Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed.

Application
As a pre-treatment: one coat of Keim Soldalit Fixativ undiluted on highly absorbent or friable substrates. Highly absorbent/roughcast substrates: Keim Soldalit can be diluted with a maximum of 10% by weight of Keim Soldalit Fixativ.

Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain. 

Clean tools with water immediately after use.

Data Sheet

Keim Soldalit Fixativ