Schneider Electric EZ9L33620 Easy9 SPD Surge Arrest T2 1P+N 20kA

This Easy9 is a SPD surge arrester. Protects the circuit from switching surges. IP 20 degree of protection on terminal DIN rail mounting support Clip on mounting mode The Uc maximum continuous operating voltage is 275VAC. The In nominal discharge current is 10kA. The Up maximum voltage protection level is 1.3kV It can be mounted on DIN rail for modular installation. Its width is 4 pitches of 9mm. According to IEC 60529 standard, the degree of protection is or IP40 in modular enclosure. The pollution degree is . The operating temperature is -5°C to 60°C. The storage temperature is -5°C to 70°C. This product complies with IEC 61643-11 standard.

• Range of product: Easy9
• Product or component type: Surge arrester
• Device short name: Easy9 SPD
• Poles: 1P + N
• Remote signalling: Without
• Surge arrester type: Electrical distribution network
• Earthing system: TT TN-S
• Disconnector device type: Associated circuit breaker at 230 V
• Complementary:
• Surge arrester class type: Type 2
• Surge arrester technology: MOV + GDT
• Nominal discharge current: Common mode: 10 kA (N/PE) Common mode: 10 kA (L/N)
• Maximum discharge current: Differential mode: 20 kA L/N Differential mode: 20 kA N/PE
• [Uc] maximum continuous operating voltage: Differential mode: 275 V L/N Differential mode: 275 V N/PE
• Maximum [Up] voltage protection level: Differential mode <1.3 kV type 2 L/N
• Local signalling: Green and red flag
• Mounting mode: Clip-on
• Limitation class: 3
• mounting support: DIN rail
• 9 mm pitches: 4
• Height: 90 mm
• Width: 36 mm
• Depth: 66.2 mm
• Colour: Grey (RAL 7035)
• Response time: <= 25 ns
• Connections - terminals: Tunnel type terminal (downside) 5…35 mm² solid or flexible
• Tightening torque: 3.5 N.m

Data Sheet: