This is a set of left and right boards for LED turn signals.

It may be difficult to understand even by looking at the image, so please check the video.

In the video, you can see that the surrounding area is glowing with the color of the blinker.
It's quite bright.

This is a turn signal LED using a large chip LED.
This is a board using 3-chip SMD.
It is a sequential type.


IC turn signal relay = Replaced with the genuine one. No wiring processing is required.
Connect the terminal coming out from the vehicle main harness to the LED board = LED.
Remove the original valve and the valve surroundings.
*When installing the LED board, please use a Phillips screwdriver to remove the screw that holds the lens in place, and then attach the lens and LED board together.

Since it was made to the exact dimensions, it is difficult to fit, but it can be installed without any modification.



[Set contents] - 4 turn signal LED white boards - 1 turn signal relay harness included A set of left and right LED turn signal boards. We have made several changes and improvements from the initial lot. The biggest change is the thickness of the board to increase its strength. Please check the image. In my personal opinion, I think that a white board is better for genuine clear lenses, and a black board is better for smoked lenses.　 Both white and black have exactly the same function. The only difference is the color of the board. There is also a matter of preference. Please choose one. I think it's hard to understand even if you look at the image, so please check the video. The video has been uploaded to YouTube, so please check it out. Click here for the video [https://youtu.be/AMfeTBfgjFU] Please copy and paste here. *In the video, the turn signal sound is heard, but it is made on purpose when shooting to help you understand the timing of the turn signal and flashing. Just like the genuine product, it does not actually work. In the video, you can see that the surrounding area is glowing in the color of the blinker. It's quite bright. This is a blinker LED that uses a large chip LED. This is a board using 3-chip SMD. It is a sequential type. ◇Compatible models◇ ☆Front/rear compatible Z250 (all ER250C models) Z800 ('13~) ZRX1200 Daeg (all ZRT20D models) Versys 650 ('10~) Versys 1000 ('12~) ☆ Rear only compatible NINJA 250 (EX250L) NINJA 400R (all ER250B models) NINJA 650R ('09-'11) NINJA 650 ('12-) NINJA 1000 ('11-) NINJA ZX-6R ('13-) ER-4N (all ER250B models) ER-6F('09~'10) Z1000('10~) etc. *However, please check the shape of your vehicle's turn signal and make sure it matches. It can be used if the turn signal model has the same shape as Daegu. ★About installation★ ☆彡Please read the following and understand the characteristics of the product before purchasing. ☆彡 IC turn signal relay = Replaced with the genuine one. No wiring processing is required. Connect the terminal coming out from the vehicle main harness to the LED board = LED. Remove the original valve and valve surroundings. *Please note when installing the LED board, please use a Phillips screwdriver to remove the screw that holds the lens in place, and then attach the lens and LED board together. It was made to fit the exact dimensions, so it is difficult to fit, but it can be installed without any modification.


Manufacturer: ‎Unique System
Brand: ‎Unique System
Manufacturer Reference: ‎Sequential-LED*4+1R White