KYO-EI (Kyoei Sangyo) Kics COMPRESSION BOLT M12 x 1.5 Total length 28mm Red 20P CB281R Compression Bolt 20P P1.5 28mm Compression Bolt 20pcs Red Compression Bolt

KYO-EI (Kyoei Sangyo) Kics COMPRESSION BOLT M12 x 1.5 Total length 28mm Red 20P CB281R Precautions for use *This product "compression bolt" is exclusively for through nuts (long type). *Be sure to install the nut with it attached to the vehicle (retrofitted). ●For installation, please use the included 6HEX, L-shaped wrench. *The maximum tightening torque for this product "compression bolt" is 4N・m (0.4kgf・m). If you apply more torque than this, the bolt tip may be damaged and the spring may lose its elasticity. *Nut threading allowance varies depending on the hub bolt protrusion amount of each car manufacturer and model. Also, it will change if a spacer is installed or a long hub bolt is installed. When installing, check the total length of the nut and the threading allowance and calculate the protrusion amount of the "comp bolt". *This product "compression bolt" requires an extra screw length of "8 mm or more". *If the product protrudes from the vehicle fender after installation, please do not use it. *This product has a washer effect due to the elasticity of the coil spring, but it cannot completely prevent screws from loosening. Periodic retightening of the wheel nut itself and this product is required. *When removing the wheel, first remove the "comp bolt" and then remove the nut.


Manufacturer: ‎Kyoei Sangyo
Brand: ‎Kyoei Sangyo
Model name: ‎Compression Bolt
Package size: ‎20.32 x 15.24 x 7.62 cm; 220 g
Item model number: ‎WCB281R
Certification: ‎Subject to manufacturer's warranty
Item weight: ‎220 g