Blackfriar Anti-Slip Floor Paint – Durable, Slip-Resistant Floor Coating

Blackfriar Anti-Slip Floor Paint is a tough, durable floor coating containing special aggregates for exceptional slip resistance. Designed for foot and light traffic areas, it provides a high-opacity finish suitable for concrete, masonry, wood, and metal surfaces, making it ideal for both indoor and outdoor use.

Key Features:

• Aggregated finish for superior slip resistance

• Tough and durable for light traffic areas

• High-opacity coating for strong coverage

• Suitable for concrete, masonry, wood, and metal

• For both interior and exterior applications

• Solvent-based formulation

Application Information:

• Coverage: 6–10 m²/L per coat

• Hard Dry: 4–6 hours at 20°C

• Recoatable: 16 hours

Surface Preparation

Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months
before applying Blackfriar Professional Anti-Slip Floor Paint.

Technical Data

• Resists grease, oil and weak solutions of acid and alkali.
• Contains special slip-resistant aggregates.
• Ideal for light industrial and domestic floors.
• Indoor and outdoor use.
• Brush or roller application.

Coverage Rate - 6-10m2/litre per coat. Two coats recommended.

Drying Time
4-6hrs@20°C. Allow to dry for a minimum of 16hrs @20°C between coats. Allow to dry for a minimum of 48hrs@20°C before subjecting to heavy traffic. Full cure is achieved in 5-
7 days@20°C.

Directions for Use

Stir thoroughly before use. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Solvent Based Floor Sealer followed by 1-2 coats of Blackfriar Professional Anti- Slip Floor Paint. On previously painted surfaces apply 1-2 coats as required. Blackfriar Professional Anti-Slip Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles, asphalt floors or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. If
concrete floors are very smooth then pre-treat with Blackfriar Professional Acid Etch followed by Blackfriar Professional Solvent Based Floor Sealer prior to applying 1-2 coats of Blackfriar Professional Anti-Slip Floor Paint. Surfaces are slippery when wet. To ensure slip resistance the floor must be kept dry when in use. The use of protective mats will help preserve the surface under tyres.

Data Sheets

Blackfriar Anti-Slip Safety Floor Paint TDS

Blackfriar Anti-Slip Safety Floor Paint MSDS