Rohde & Schwarz RTM3002 2-Channel Oscilloscope

Key Features At A Glance

• Available as 2-channel (RTM3002) or 4-channel (RTM3004); 16 digital channels add with the MSO option
• Bandwidth options from 100 MHz to 1 GHz across the series
• Rohde & Schwarz 10-bit ADC reveals small signal details in the presence of large signals
• 10.1-inch capacitive touch display, 1280 × 800 resolution, with R&S SmartGrid split dual-window view
• 40 Msample memory per channel (80 Msample interleaved); optional 400 Msample history with R&S RTM-K15
• Up to 5 Gsample/s sample rate interleaved (2.5 Gsample/s on all channels)
• LAN and USB host/device connectivity with fast display over Ethernet
• 10-second boot time and a standard 3-year warranty

The R&S RTM3000 is a series of bench oscilloscopes built around a Rohde & Schwarz 10-bit analog-to-digital converter and a 10.1-inch capacitive touch display at 1280 × 800 pixel resolution. Rohde & Schwarz positions the series as an X-in-1 instrument, combining an oscilloscope with a logic analyzer, spectrum analyzer, protocol analyzer, frequency response analyzer, arbitrary waveform generator, pattern generator, counter and digital voltmeter in a single chassis.

Rohde & Schwarz identifies the series as a fit for R&D debugging of power supplies, R&D debugging of serial buses, manufacturing test and repair, and education. Consolidating multiple instrument functions into one unit is aimed at engineers and technicians who need to troubleshoot and solve a wide range of problems with one instrument.

ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive, Elgin, Illinois.

Brand Heritage

Rohde & Schwarz is a privately held company founded in Munich, Germany in 1933, and has operated under the Rohde & Schwarz name ever since.

Compare Other Models in This Series

The R&S RTM3000 family comprises two base models that share the same core architecture: the two-channel R&S RTM3002 and the four-channel R&S RTM3004. Both are built on the same 10-bit ADC, 10.1-inch capacitive touch display and acquisition engine, so the measurement experience is consistent regardless of channel count.

Bandwidth is selected separately as an option, spanning 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz across the series. With the mixed-signal option, either model can add 16 digital channels, turning the instrument into a combined analog-and-digital troubleshooting platform.

Each new model linked below is its own dedicated product page with condition-matched pricing. Select the R&S RTM3002 or R&S RTM3004 page that matches the channel count and bandwidth option you need, and review its specifications and pricing there.

The primary difference between the two models is analog channel count: the R&S RTM3002 provides two analog channels, while the R&S RTM3004 provides four. The bandwidth options carry model-specific order codes — for example, the 200 MHz upgrade is R&S RTM-B222 on the RTM3002 and R&S RTM-B242 on the RTM3004, with parallel codes for the 350 MHz, 500 MHz and 1 GHz tiers.

Beyond channel count and bandwidth code, the two models share the same memory depth, sample rate, display and option ecosystem. Refer to the comparison table below for the per-model specifications and available bandwidth options.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• R&S®RT-ZP03 single-ended passive probe (one per channel, 2 total)
• Power cord
• 3-year warranty

Product Core & Specifications

Important: The MSO option adds 16 digital channels and includes cabling, lead sets and grabbers.

Important: The 16 digital channels require the mixed-signal (MSO) option R&S®RTM-B1; the base oscilloscope provides analog channels only (per "16 digital channels (with MSO option)" and "Logic analyzer (16-channel MSO): R&S®RTM-B1 option").

Important: 400 Msample history mode is optional and requires the R&S®RTM-K15 option.

Important: Pattern generator (4 bits) and the 25 MHz waveform generator require the R&S®RTM-B6 option.

Important: Data without tolerance limits is not binding.

Usage tip: for switched-mode power-supply debugging, the R&S RT-ZPR20 power rail probe (2.0 GHz, ±60 V offset) is among the probes listed for this series.

About this New unit

This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.